ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Management Commands > SNMP Commands > snmp trap link-status > no snmp trap link-status

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no snmp trap link-status

This command disables link status traps by interface.

Note

Note

This command is valid only when the Link Up/Down Flag is enabled.

Format	no snmp trap link-status
Mode	Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback