show rmon events

This command displays the entries in the RMON event table.

Format show rmon events
Mode Privileged EXEC
Parameter Description
Event Index An index that uniquely identifies an entry in the event table. Each such entry defines one event that is to be generated when the appropriate conditions occur. The range is 1 to 65535.
Event Description A comment describing the event entry. The default is alarmEvent.
Event Type The type of notification that the probe makes about the event. Possible values are None, Log, SNMP (Simple Network Management Protocol) Trap, Log and SNMP Trap. The default is None.
Event Owner Owner string associated with the entry. The default is monitorEvent.
Event Community The SNMP community specific by this octet string which is used to send an SNMP trap. The default is public.
Owner Event owner. The owner string associated with the entry.
Last time sent The last time over which a log or a SNMP trap message is generated.

The following example shows CLI display output for the command.

(Extreme 220) (Routing) # show rmon events
Index  Description       Type      Community   Owner      Last time sent
-------------------------------------------------------------------------------
1      test              log       public      MIB        0 days 0 h:0 m:0 s