ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Routing Commands > Routing Information Protocol Commands > distribute-list out (RIP)

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

distribute-list out (RIP)

This command is used to specify the access list to filter routes received from the source protocol.

Default	0
Format	distribute-list 1-199 out {ospf \| bgp \| static \| connected}
Mode	Router RIP (Routing Information Protocol) Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback