show lldp statistics

Use this command to display the current LLDP (Link Layer Discovery Protocol) traffic and remote table statistics for a specific interface or for all interfaces.

Format show lldp statistics {unit/slot/port | all}
Mode Privileged EXEC
Column
Meaning
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not inserted due to insufficient resources.
Total Ageouts Total number of times a complete remote data entry was deleted because the Time to Live interval expired.

The table contains the following column headings:

Column
Meaning
Interface The interface in unit/slot/port format.
TX Total Total number of LLDP packets transmitted on the port.
RX Total Total number of LLDP packets received on the port.
Discards Total number of LLDP frames discarded on the port for any reason.
Errors The number of invalid LLDP frames received on the port.
Ageouts Total number of times a complete remote data entry was deleted for the port because the Time to Live interval expired.
TVL Discards The number of TLVs discarded.
TVL Unknowns Total number of LLDP TLVs received on the port where the type value is in the reserved range, and not recognized.
TLV MED The total number of LLDP-MED TLVs received on the interface.
TLV 802.1 The total number of LLDP TLVs received on the interface which are of type 802.1.
TLV 802.3 The total number of LLDP TLVs received on the interface which are of type 802.3.