ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > LLDP (802.1AB) Commands > lldp transmit

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

lldp transmit

Use this command to enable the LLDP (Link Layer Discovery Protocol) advertise capability on an interface or a range of interfaces.

Default	Disabled
Format	lldp transmit
Mode	Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback