snmp-server group

This command creates an SNMP (Simple Network Management Protocol) access group.

Default Generic groups are created for all versions and privileges using the default views.
Format snmp-server group group-name {v1 | v2c | v3 {noauth | auth | priv}} [context context-name] [read read-view] [write write-view] [notify notify-view]
Mode Global Config
Parameter Description
group-name The group name to be used when configuring communities or users. The range is 1 to 30 characters.
v1 This group can only access via SNMPv1.
v2 This group can only access via SNMPv2c.
v3 This group can only access via SNMPv3.
noauth This group can be accessed only when not using Authentication or Encryption. Applicable only if SNMPv3 is selected.
auth This group can be accessed only when using Authentication but not Encryption. Applicable only if SNMPv3 is selected.
priv This group can be accessed only when using both Authentication and Encryption. Applicable only if SNMPv3 is selected.
context-name The SNMPv3 context used during access. Applicable only if SNMPv3 is selected.
read-view The view this group will use during GET requests. The range is 1 to 30 characters.
write-view The view this group will use during SET requests. The range is 1 to 30 characters.
notify-view The view this group will use when sending out traps. The range is 1 to 30 characters.