Use this command to display the summary information about remote devices that transmit current LLDP (Link Layer Discovery Protocol) MED data to the system. You can show information about LLDP MED remote data received on all valid LLDP interfaces or on a specific physical interface.
Format | show lldp med remote-device {unit/slot/port | all} |
Mode | Privileged EXEC |
Local Interface | The interface that received the LLDPDU from the remote device. |
Remote ID | An internal identifier to the switch to mark each remote device to the system. |
Device Class | Device classification of the remote device. |
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show lldp med remote-device all
LLDP MED Remote Device Summary
Local
Interface Remote ID Device Class
--------- --------- ------------
1/0/8 1 Class I
1/0/9 2 Not Defined
1/0/10 3 Class II
1/0/11 4 Class III
1/0/12 5 Network Con