Use this command to display the SNTP (Simple Network Time Protocol) client source interface configured on the switch.
Format | show sntp source-interface |
Mode | Privileged EXEC |
SNTP Client Source Interface | The interface ID of the physical or logical interface configured as the SNTP client source interface. |
SNTP Client Source IPv4 Address | The IP address of the interface configured as the SNTP client source interface. |
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show sntp source-interface SNTP Client Source Interface................... (not configured) (Extreme 220) (Routing) #