This command displays spanning tree settings for the bridge. The following information appears.
| Format | show spanning-tree brief |
| Mode |
|
| Bridge Priority | Configured value. |
| Bridge Identifier | The bridge identifier for the selected MST instance. It is made up using the bridge priority and the base MAC address of the bridge. |
| Bridge Max Age | Configured value. |
| Bridge Max Hops | Bridge max-hops count for the device. |
| Bridge Hello Time | Configured value. |
| Bridge Forward Delay | Configured value. |
| Bridge Hold Time | Minimum time between transmission of Configuration Bridge Protocol Data Units (BPDUs). |
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show spanning-tree brief Bridge Priority................................ 32768 Bridge Identifier.............................. 80:00:00:10:18:48:FC:07 Bridge Max Age................................. 20 Bridge Max Hops................................ 20 Bridge Hello Time.............................. 2 Bridge Forward Delay........................... 15 Bridge Hold Time............................... 6 (Extreme 220) (Routing) #
Print
this page
Email this topic
Feedback
View PDF
Download EPUB