ip load-sharing

This command configures IP ECMP (Equal Cost Multi Paths) load balancing mode.

Default	6
Format	ip load-sharing mode {inner \| outer}
Mode	Global Config

Parameter	Description
mode	Configures the load balancing or sharing mode for all EMCP groups. 1: Based on a hash using the Source IP address of the packet. 2: Based on a hash using the Destination IP address of the packet. 3: Based on a hash using the Source and Destination IP addresses of the packet. 4: Based on a hash using the Source IP address and the Source TCP/UDP Port field of the packet. 5: Based on a hash using the Destination IP address and the Destination TCP/UDP Port field of the packet. 6: Based on a hash using the Source and Destination IP address, and the Source and Destination TCP/UDP Port fields of the packet.
inner	Use the inner IP header for tunneled packets.
outer	Use the outer IP header for tunneled packets.

Published February 2019prev | next