This command displays BootP/DHCP Relay information.
Format | show ip bootpdhcprelay |
Modes |
|
Parameter | Definition |
---|---|
Maximum Hop Count | The maximum allowable relay agent hops. |
Minimum Wait Time (Seconds) | The minimum wait time. |
Admin Mode | Whether relaying of requests is enabled or disabled. |
Circuit Id Option Mode | The DHCP circuit Id option which may be enabled or disabled. |
The following shows an example of the command.
(Extreme 220) (Routing) #show ip bootpdhcprelay
Maximum Hop Count.............................. 4
Minimum Wait Time(Seconds)..................... 0
Admin Mode..................................... Disable
Circuit Id Option Mode......................... Enable