ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Utility Commands > Simple Network Time Protocol Commands > sntp unicast client poll-retry

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

sntp unicast client poll-retry

This command will set the poll retry for SNTP (Simple Network Time Protocol) unicast clients to a value from 0 to 10.

Default	1
Format	sntp unicast client poll-retry poll-retry
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback