ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Denial of Service Commands > dos-control udpport > no dos-control udpport

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no dos-control udpport

This command disables UDP L4 source = destination port number (Source UDP Port = Destination UDP Port) Denial of Service protection.

Format	no dos-control udpport
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback