ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > MLD Snooping Commands > set mld maxresponse > no set mld maxresponse

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no set mld maxresponse

Use this command to set the max response time (on the interface or VLAN) to the default value.

Format	no set mld maxresponse
Mode	Global Config Interface Config VLAN Mode

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback