rmon alarm

This command sets the RMON alarm entry in the RMON alarm MIB group.

Format	rmon alarm alarm-number variable sample-interval {absolute \| delta} rising-threshold value [rising-event-index] falling-threshold value [falling-event-index] [startup {rising \| falling \| rising-falling}] [owner string]
Mode	Global Config

Parameter	Description
alarm-number	An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample at a particular interval for an object on the device. The range is 1 to 65535.
variable	The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1 primitive type of integer.
sample-interval	The interval in seconds over which the data is sampled and compared with the rising and falling thresholds. The range is 1 to 2147483647. The default is 1.
absolute	The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed value.
rising-thresholdvalue	The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1.
rising-event-index	The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535. The default is 1.
falling-thresholdvalue	The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1.
falling-event-index	The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to 65535. The default is 2.
startup	The alarm that may be sent. Possible values are rising, falling or rising-falling (indicating both). The default is rising-falling.
string	The owner string associated with the alarm entry. The default is monitorAlarm.

The following shows an example of the command.

(Extreme 220) (Config) # rmon alarm 1 ifInErrors.2 30 absolute rising-threshold 100 1 falling-threshold 10 2 startup rising owner myOwner

Published February 2019prev | next