ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Routing Commands > Routing Information Protocol Commands > ip rip receive version > no ip rip receive version

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no ip rip receive version

This command configures the interface to allow RIP (Routing Information Protocol) control packets of the default version(s) to be received.

Format	no ip rip receive version
Mode	Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback