snmp-server community-group
This command configures a community access string to permit access via the SNMPv1 and SNMPv2c protocols.
Format |
snmp-server community-group
community-string
group-name [ipaddress ip-address] |
Mode |
Global Config |
Parameter |
Description |
community-string |
The community which is created and then associated with the group. The range is 1 to 20 characters. |
group-name |
The name of the group that the community is associated with. The range is 1 to 30 characters. |
ipaddress |
Optionally, the IPv4 address that the community may be accessed from. |