Use this command to manually configure IPv6 global address, enable/disable stateless global address autoconfiguration and to enable/disable dhcpv6 client protocol information on the service port.
Note
Multiple IPv6 prefixes can be configured on the service port.| Format | serviceport ipv6 address {address/prefix-length [eui64]|autoconfig|dhcp} |
| Mode | Privileged EXEC |
| Parameter | Description |
|---|---|
| address | IPv6 prefix in IPv6 global address format. |
| prefix-length | IPv6 prefix length value. |
| eui64 | Formulate IPv6 address in eui64 address format. |
| autoconfig | Configure stateless global address autoconfiguration capability. |
| dhcp | Configure dhcpv6 client protocol. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB