ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > 802.1X Supplicant Commands > dot1x supplicant timeout held-period > no dot1x supplicant timeout held-period

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no dot1x supplicant timeout held-period

This command sets the held-period value to the default value.

Format	no dot1x supplicant timeout held-period
Mode	Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback