ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Management Commands > SNMP Commands > snmp-server enable traps bgp > no snmp-server enable traps bgp state-changes limited

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no snmp-server enable traps bgp state-changes limited

This command disables the two traps defined in the standard BGP MIB, RFC 4273.

Format	no snmp-server enable traps bgp state-changes limited
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback