Use this command to display authentication method information either for all interfaces or a specified port.
Format | show authentication interface {all | unit/slot/port } |
Mode | Privileged EXEC |
The following information is displayed for each interface.
Interface | The interface for which authentication configuration information is being displayed. |
Authentication Restart timer | The time, in seconds, after which reauthentication starts. |
Configured method order | The order of authentication methods used on a port. |
Enabled method order | The order of authentication methods used on a port. |
Configured method priority | The priority for the authentication methods used on a port. |
Enabled method priority | The priority for the authentication methods used on a port. |
Number of authenticated clients | The number of authenticated clients. |
Logical Interface | The logical interface |
Client MAC addr | The MAC address for the client. |
Authenticated Method | The current authentication method. |
Auth State | If the authentication was successful. |
Auth Status | The current authentication status. |
The following example displays the authentication interface information for all interfaces.
Note
Although captive-portal is displayed in the command output, captive portal is not supported in this version of the product.(Extreme 220) #show authentication interface all
Interface...................................... 1/0/1
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined undefined
Enabled method priority........................ undefined undefined undefined
Number of authenticated clients................ 0
Interface...................................... 1/0/2
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined undefined
Enabled method priority........................ undefined undefined undefined
Number of authenticated clients................ 0
Interface...................................... 1/0/3
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined undefined
Enabled method priority........................ undefined undefined undefined
Number of authenticated clients................ 0
Interface...................................... 1/0/4
Authentication Restart timer................... 300
Configured method order........................ dot1x mab captive-portal
Enabled method order........................... dot1x mab undefined
Configured method priority..................... undefined undefined undefined
Enabled method priority........................ undefined undefined undefined
Number of authenticated clients................ 0