ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > IPv6 Management Commands > IPv6 Management Commands > serviceport ipv6 enable

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

serviceport ipv6 enable

Use this command to enable IPv6 operation on the service port. By default, IPv6 operation is enabled on the service port.

Default	Enabled
Format	serviceport ipv6 enable
Mode	Privileged EXEC

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback