Join Timer |
The interval
between the transmission of GARP PDUs registering (or reregistering) membership
for an attribute. Current attributes are a VLAN or multicast group. There is an
instance of this timer on a per-Port, per-GARP participant basis. Permissible
values are 10 to 100 centiseconds (0.1 to 1.0 seconds). The factory default is 20
centiseconds (0.2 seconds). The finest granularity of specification is one
centisecond (0.01 seconds). |
Leave Timer |
The period of
time to wait after receiving an unregister request for an attribute before
deleting the attribute. Current attributes are a VLAN or multicast group. This may
be considered a buffer time for another station to assert registration for the
same attribute in order to maintain uninterrupted service. There is an instance of
this timer on a per-Port, per-GARP participant basis. Permissible values are 20 to
600 centiseconds (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6
seconds). |
LeaveAll Timer |
This Leave
All Time controls how frequently LeaveAll PDUs are generated. A LeaveAll PDU
indicates that all registrations will shortly be deregistered. Participants will
need to rejoin in order to maintain registration. There is an instance of this
timer on a per-Port, per-GARP participant basis. The Leave All Period Timer is set
to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. Permissible
values are 200 to 6000 centiseconds (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds). |
Port GMRP Mode |
The GMRP
administrative mode for the port, which is enabled or disabled (default). If this
parameter is disabled, Join Time, Leave Time and Leave All Time have no
effect. |