ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > MLD Snooping Commands > set mld groupmembership-interval > no set groupmembership-interval

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no set groupmembership-interval

Use this command to set the MLDv2 Group Membership Interval time to the default value.

Format	no set mld groupmembership-interval
Mode	Interface Config Global Config VLAN Mode

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback