This command displays the content of text-based configuration files from the CLI. The text-based configuration files (startup-config, backup-config and factory-defaults) are saved compressed in flash. With this command, the files are decompressed while displaying their content.
| Format | show {startup-config | backup-config | factory-defaults} |
| Mode | Privileged EXEC |
| Parameter | Description |
|---|---|
| startup-config | Display the content of the startup-config file. |
| backup-config | Display the content of the backup-config file. |
| factory-defaults | Display the content of the factory-defaults file. |
The following example shows CLI display output for the command using the startup-config parameter.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB(Extreme 220) (Routing) #show startup-config
!Current Configuration:
!
!System Description "Extreme 220-Series 24GE, 2 10GbE SFP+ ports, 1 Fixed AC PSU
, 1 RPS port, L3 Switching, 1.1.50.6, Linux 3.6.5, U-Boot 2012.10-gac78d49 (Jan
09 2017 - 11:09:03)"
!System Software Version "1.1.50.6"
!System Up Time "0 days 1 hrs 35 mins 29 secs"
!Additional Packages FASTPATH QOS,FASTPATH IPv6 Management,FASTPATH Stacking
,FASTPATH Routing
!Current SNTP Synchronized Time: SNTP Client Mode Is Disabled
!
serviceport protocol none
serviceport ip 10.50.3.138 255.255.254.0 10.50.2.1
vlan database
exit
ip ssh server enable
configure
stack
member 1 3
exit
ip host "devices.extremenetworks.com" 10.49.72.138
slot 1/0 3
set slot power 1/0
no set slot disable 1/0
username "nms" password 406a25922efd849329406439d6ce2eadd2f59c4e2f25a6cc92f6bbe3
31d53ed8b7848defc4c002f7b639a0633e21951ef68a537451d7afea33114ac350acbf9b level 1
5 encrypted
line console
exit
line telnet
exit
line ssh
exit
!
snmp-server community "ExtremeNMS" ro ipaddress 134.141.5.175
dot1as
router rip
exit
exit