show ip source binding

Use this command to display the IPSG bindings.

Format show ip source binding [{dhcp-snooping|static}] [interface unit/slot/port] [vlan id]
Mode
  • Privileged EXEC
  • User EXEC
Column
Meaning
MAC Address The MAC address for the entry that is added.
IP Address The IP address of the entry that is added.
Type Entry type; statically configured from CLI or dynamically learned from DHCP (Dynamic Host Configuration Protocol) Snooping.
VLAN VLAN for the entry.
Interface IP address of the interface in unit/slot/port format.

The following example shows CLI display output for the command.

(Extreme 220) #show ip source binding
MAC Address       IP Address       Type         Vlan     Interface
-----------------  ---------------  -------------  -----  -------------
00:00:00:00:00:08          1.2.3.4  dhcp-snooping     2        1/0/1
00:00:00:00:00:09          1.2.3.4  dhcp-snooping     3        1/0/1
00:00:00:00:00:0A          1.2.3.4  dhcp-snooping     4        1/0/1