show rmon hcalarms

This command displays the entries in the RMON high-capacity alarm table.

Format show rmon {hcalarms|hcalarm alarm-index}
Mode Privileged EXEC
Parameter Description
alarm-index An arbitrary integer index value used to uniquely identify the high capacity alarm entry. The range is 1 to 65535.

For a description of the parameters in the command output, refer to the command rmon hcalarm.

The following example shows CLI display output for the command.

(Extreme 220) (Routing) #show rmon hcalarms
Index    OID                      Owner
1      alarmInterval.1            MibBrowser
2      alarmInterval.1            MibBrowser
(Extreme 220) (Routing) #show rmon hcalarm 1
Alarm 1
OID: alarmInterval.1
Last Sample Value: 1
Interval: 1
Sample Type: absolute
Startup Alarm: rising-falling
Rising Threshold High: 0
Rising Threshold Low: 1
Rising Threshold Status: Positive
Falling Threshold High: 0
Falling Threshold Low: 1
Falling Threshold Status: Positive
Rising Event: 1
Falling Event: 2
Startup Alarm: Rising-Falling
Owner: MibBrowser