ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Port Mirroring Commands > monitor session destination > no monitor session destination

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no monitor session destination

This command removes the specified probe port from the selected port mirroring session.

Format	no monitor session session-id destination {interface unit/slot/port \|remote vlan vlan-id reflector-port unit/slot/port}
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback