Use this command to display a summary of the current LLDP (Link Layer Discovery Protocol) MED configuration for a specific interface. unit/slot/port indicates a specific physical interface. all indicates all valid LLDP interfaces.
Format | show lldp med interface {unit/slot/port | all} |
Mode | Privileged EXEC |
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show lldp med interface all Interface Link configMED operMED ConfigNotify TLVsTx --------- ------ --------- -------- ------------ ----------- 1/0/1 Down Disabled Disabled Disabled 0,1 1/0/2 Up Disabled Disabled Disabled 0,1 1/0/3 Down Disabled Disabled Disabled 0,1 1/0/4 Down Disabled Disabled Disabled 0,1 1/0/5 Down Disabled Disabled Disabled 0,1 1/0/6 Down Disabled Disabled Disabled 0,1 1/0/7 Down Disabled Disabled Disabled 0,1 1/0/8 Down Disabled Disabled Disabled 0,1 1/0/9 Down Disabled Disabled Disabled 0,1 1/0/10 Down Disabled Disabled Disabled 0,1 1/0/11 Down Disabled Disabled Disabled 0,1 1/0/12 Down Disabled Disabled Disabled 0,1 1/0/13 Down Disabled Disabled Disabled 0,1 1/0/14 Down Disabled Disabled Disabled 0,1 TLV Codes: 0- Capabilities, 1- Network Policy 2- Location, 3- Extended PSE 4- Extended Pd, 5- Inventory --More-- or (q)uit (Extreme 220) (Routing) #show lldp med interface 1/0/2 Interface Link configMED operMED ConfigNotify TLVsTx --------- ------ --------- -------- ------------ ----------- 1/0/2 Up Disabled Disabled Disabled 0,1 TLV Codes: 0- Capabilities, 1- Network Policy 2- Location, 3- Extended PSE 4- Extended Pd, 5- Inventory (Extreme 220) (Routing) #