Use this command to display the current PoE configuration and status information for all ports.
| Format | show poe |
| Mode | Privileged EXEC |
| Firmware Version | The firmware version on the controller. This value cannot be changed or upgraded. |
| PSE Main Operational Status | The operational status of the PSE. |
| Total Power Available | The total power budget. |
| Threshold Power | The total power minus the guard band. If usage goes above this value, new ports are not powered up. |
| Total Power Consumed | Total power delivered by all ports. |
| Usage Threshold | User-configured threshold, used for Guard band calculation. |
| Power Management Mode | The current power management mode: Dynamic or Static. |
| Traps | Whether PoE (Power over Ethernet) traps are enabled or disabled. |
The following example shows CLI display output for the command.
Print
this page
Email this topic
Feedback
View PDF
Download EPUB(Extreme 220) #show poe
Firmware Version............................... 1.3.0.7
PSE Main Operational Status.................... OFF
Total Power Available.......................... 900 Watts
Threshold Power................................ 459 W
Total Power Consumed........................... 0
Usage Threshold................................ 90
Power Management Mode.......................... Dynamic
Traps.......................................... Enable