ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Routing Commands > Routing Information Protocol Commands > default-metric (RIP) > no default-metric (RIP)

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no default-metric (RIP)

This command is used to reset the default metric of distributed routes to its default value.

Format	no default-metric
Mode	Router RIP (Routing Information Protocol) Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback