ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Spanning Tree Protocol Commands > spanning-tree mode > no spanning-tree mode

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no spanning-tree mode

This command globally configures the switch to the default 200 Series spanning-tree mode, MSTP (Multiple Spanning Tree Protocol).

Format	no spanning-tree mode { pvst \| rapid-pvst }
Mode	Global Configuration

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback