Extreme Networks

Request Demo

ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Quality of Service Commands > IPv6 Access Control List Commands > ipv6 access-list resequence > no sequence-number

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no sequence-number

Use this command to remove the ACL (Access Control List) rule with the specified sequence number from the ACL.

Format	no sequence-number
Mode	Ipv6-Access-List Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback