ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Spanning Tree Protocol Commands > spanning-tree vlan

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

spanning-tree vlan

Use this command to enable/disable spanning tree on a VLAN.

Default	None
Format	spanning-tree vlan vlan-list
Mode	Global Config

Parameter	Description
vlan-list	The VLANs to which to apply this command.

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback