ipv6 access-list

This command creates an IPv6 ACL (Access Control List) identified by name, consisting of classification fields defined for the IP header of an IPv6 frame. The name parameter is a case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the IPv6 access list. The rate-limit attribute configures the committed rate and the committed burst size.

If an IPv6 ACL by this name already exists, this command enters IPv6-Access-List config mode to allow updating the existing IPv6 ACL.

Note

Note

The CLI mode changes to IPv6-Access-List Config mode when you successfully execute this command.
Format ipv6 access-list name
Mode Global Config