Preface
Using the Command-Line Interface
Stacking Commands
Management Commands
Utility Commands
Switching Commands
Routing Commands
IPv6 Management Commands
Quality of Service Commands
Application Commands
200 Series Log Messages
- Core
- Utilities
- Management
- Switching
- QoS
- Routing/IPv6 Routing
- Stacking
- Technologies
- O/S Support

snmptrap ipaddr snmpversion

This command modifies the SNMP (Simple Network Management Protocol) version of a trap. The maximum length of name is 16 case-sensitive alphanumeric characters. The snmpversion options are snmpv1 or snmpv2.

Note

This command does not support a “no” form.

Format	snmptrap ipaddr snmpversion name snmpversion
Mode	Global Configuration

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback