snmp-server enable traps bgp
The bgp option on the snmp-server enable traps command (see
snmp-server enable traps) enables the two traps
defined in the standard BGP MIB, RFC 4273. A trap is sent when an adjacency reaches the
ESTABLISHED state and when a backward adjacency state transition occurs.
| Default |
BGP traps are disabled by default. |
| Format |
snmp-server enable traps bgp state-changes limited |
| Mode |
Global Config |
| Parameter |
Description |
| state-changes limited |
Enable standard traps defined in RFC 4273. |
Print
this page
Email this topic
Feedback
View PDF
Download EPUB