show port-channel counters

Use this command to display port-channel counters for the specified port.

Format show port-channel unit/slot/port counters
Mode Privileged EXEC
Column
Meaning
Local Interface The valid slot/port number.
Channel Name The name of this port-channel (LAG (Link Aggregation Group)).
Link State Whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Port Channel Flap Count The number of times the port-channel was inactive.
Mbr Ports The slot/port for the port member.
Mbr Flap Counters The number of times a port member is inactive, either because the link is down, or the admin state is disabled.

The following example shows CLI display output for the command.

(Extreme 220) #show port-channel 3/1 counters
Local Interface................................ 3/1
Channel Name................................... ch1
Link State..................................... Down
Admin Mode..................................... Enabled
Port Channel Flap Count........................ 0
Mbr    Mbr Flap
Ports  Counters
------ ---------
0/1    0
0/2    0
0/3    1
0/4    0
0/5    0
0/6    0
0/7    0
0/8    0