show stack-port diag

This command shows stack port diagnostics for each port and is only intended for Field Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this command and capture this information. In verbose mode, the statistics and counters for RPC, transport, CPU, and transport RX/TX modules are displayed.

Format show stack-port diag [1-n | all] [verbose]
Mode Privileged EXEC
Column
Meaning
Unit The unit number.
Interface The slot and port numbers.
Diagnostic Entry1 80-character string used for diagnostics.
Diagnostic Entry2 80-character string used for diagnostics.
Diagnostic Entry3 80-character string used for diagnostics.
TBYT Transmitted Bytes
TPKT Transmitted Packets
TFCS Transmit FCS Error Frame Counter
TERR Transmit Error (set by system) Counter
RBYT Received Bytes
RPKT Received Packets
RFCS Received FCS Error Frame Counter
RFRG Received Fragment Counter
RJBR Received Jabber Frame Counter
RUND Received Undersize Frame Counter
ROVR Received Oversized Frame Counter
RUNT Received RUNT Frame Counter

This example displays the stack ports and associated statistics of specified unit or all units.

(Extreme 220) (Routing) #show stack-port diag 1
1 - 0/53:
RBYT:27ed9a7b RPKT:bca1b TBYT:28a0739e TPKT:c93ee
RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
TFCS:0 TERR:0
1 - 0/54:
RBYT:8072ed RPKT:19a66 TBYT:aecfb80 TPKT:66e4d
RFCS:6e RFRG:4414 RJBR:0 RUND:c19 RUNT:af029b1
TFCS:0 TERR:0
1 - 0/55:
RBYT:0 RPKT:0 TBYT:ae8 TPKT:23
RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
TFCS:0 TERR:0
1 - 0/56:
RBYT:0 RPKT:0 TBYT:ae8 TPKT:23
RFCS:0 RFRG:0 RJBR:0 RUND:0 RUNT:0
TFCS:0 TERR:0
Example 2: ‘show stack-port diag [<1-n> | all] [verbose]‘ transport etc module statistics of specified unit or all units.
In this example, It dumps RPC, Transport (ATP, Next Hop, and RLink), and CPU Transport Rx/Tx modules Statistics of Unit 2.
(Extreme 220) (Routing) #show stack-port diag 2 verbose
-----------------------------------------
HPC RPC statistics/counters from unit..2
-----------------------------------------
Registered Functions........................... 58
Client Requests................................ 0
Server Requests................................ 0
Server Duplicate Requests...................... 0
Server Replies................................. 0
Client Remote Tx............................... 0
Client Remote Retransmit Count................. 0
Tx without Errors.............................. 0
Tx with Errors................................. 0
Rx Timeouts.................................... 0
Rx Early Exits................................. 0
Rx Out of Sync................................. 0
No Buffer...................................... 0
Collect Sem Wait Count......................... 0
Collect Sem Dispatch Count..................... 0
-------------------------------------
RPC statistics/counters from unit..2
-------------------------------------
Client RPC Requests Count...................... 3
Client RPC Reply Count......................... 0
Client RPC Fail to xmit Count.................. 0
Client RPC Response Timedout Count............. 3
Client RPC Missing Requests.................... 0
Client RPC Detach/Remove Count................. 0
Client RPC Current Sequence Number............. 3
Server RPC Request Count....................... 0
Server RPC Reply Count......................... 0
Server RPC Processed Transactions.............. 0
Server RPC Received Wrong Version Req.......... 0
Server RPC No Handlers......................... 0
Server RPC Retry Transmit Count................ 0
Server RPC Repetitive Tx Errors................ 0
-------------------------------------
ATP statistics/counters from unit..2
-------------------------------------
Transmit Pending Count......................... 2
Current number of TX waits..................... 2
Rx transactions created........................ 145
Rx transactions freed.......................... 145
Rx transactions freed(raw)..................... 0
--More-- or (q)uitATP: TX timeout, seq 74. f:cc cli 778. to 1 tx cnt 21.
Tx transactions created........................ 290
BET Rx Dropped Pkts Count...................... 0
ATP Rx Dropped Pkts Count...................... 0
Failed to Add Key Pkt Count.................... 0
Source Lookup Failure Count.................... 0
Old Rx transactions Pkts drop Count............ 0
Nr of CPUs found in ATP communication.......... 2
-----------------------------------------------
CPU Transport statistics/counters from unit..2
-----------------------------------------------
State Initialization........................... Done
Rx Setup....................................... Done
Tx Setup....................................... Done
Tx CoS[0] Reserve.............................. 100
Tx CoS[1] Reserve.............................. 100
Tx CoS[2] Reserve.............................. 100
Tx CoS[3] Reserve.............................. 100
Tx CoS[4] Reserve.............................. 60
Tx CoS[5] Reserve.............................. 40
Tx CoS[6] Reserve.............................. 20
Tx CoS[7] Reserve.............................. 0
Tx Pkt Pool Size............................... 200
Tx Available Pkt Pool Size..................... 198
Tx failed/error Count.......................... 0
Rx Pkt Pool Size............................... 8
------------------------------------------
Next Hop statistics/counters from unit..2
------------------------------------------
State Initialization........................... Done
Component Setup................................ Done
Thread Priority................................ 100
Rx Priority.................................... 105
Local CPU Key.................................. 00:24:81:d0:0f:c7
MTU Size....................................... 2048
Vlan Id........................................ 4094
CoS Id......................................... 7
Internal Priority for pkt transmission......... 7
Rx Pkt Queue Size.............................. 256
Tx Pkt Queue Size.............................. 64
Rx Pkt Dropped Count........................... 0
Tx Failed Pkt Count............................ 0
---------------------------------------
RLink statistics/counters from unit..2
---------------------------------------
State Initialization........................... Done
L2 Notify In Pkts.............................. 0
L2 Notify In Pkts discarded.................... 0
L2 Notify Out Pkts ............................ 0
L2 Notify Out Pkts discarded................... 0
Linkscan In Pkts............................... 0
Linkscan In Pkts discarded..................... 0
Linkscan Out Pkts ............................. 0
Linkscan Out Pkts discarded.................... 0
Auth/Unauth In Callbacks....................... 0
Auth/Unauth In Callbacks discarded............. 0
Auth/Unauth Out Callbacks...................... 0
Auth/Unauth Out Callbacks discarded............ 0
RX Tunnelling In Pkts.......................... 0
RX Tunnelling In Pkts discarded................ 0
RX Tunnelling Out Pkts......................... 0
RX Tunnelling Out Pkts discarded............... 0
OAM Events In.................................. 0
OAM Events In discarded........................ 0
OAM Events Out................................. 0
OAM Events Out discarded....................... 0
BFD Events In.................................. 0
BFD Events In discarded........................ 0
BFD Events Out................................. 0
BFD Events Out discarded....................... 0
Fabric Events In............................... 0
Fabric Events In discarded..................... 0
Fabric Events Out.............................. 0
Fabric Events Out discarded.................... 0
Scan Add Requests In........................... 0
Scan Del Requests In........................... 0
Scan Notify(Run Handlers) Out.................. 0
Scan Notify(Traverse Processing)............... 0
(Extreme 220) (Routing) #