ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Management Commands > Hypertext Transfer Protocol Commands > ip http secure-protocol

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

ip http secure-protocol

This command sets protocol levels (versions). The protocol level can be set to TLS1, SSL3, or to both TLS1 and SSL3.

Default	SSL3 and TLS1
Format	ip http secure-protocol [SSL3] [TLS1]
Mode	Privileged EXEC

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback