This command displays the Static MAC Filtering information for all Static MAC Filters. If you specify all, all the Static MAC Filters in the system are displayed. If you supply a value for macaddr, you must also enter a value for vlanid, and the system displays Static MAC Filter information only for that MAC address and VLAN.
Format | show mac-address-table static {macaddr vlanid | all} |
Mode | Privileged EXEC |
MAC Address | The MAC Address of the static MAC filter entry. |
VLAN ID | The VLAN ID of the static MAC filter entry. |
Source Port(s) | The source port filter set's slot and port(s). |
Note
Only multicast address filters will have destination port lists.