Use this command to display the default domain name, a list of name server hosts, the static and the cached list of host names and addresses. The parameter name ranges from 1-255 characters. This command displays both IPv4 and IPv6 entries.
Format | show hosts [name] |
Mode |
|
Host Name | Domain host name. |
Default Domain | Default domain name. |
Default Domain List | Default domain list. |
Domain Name Lookup | DNS client enabled/disabled. |
Number of Retries | Number of time to retry sending Domain Name System (DNS) queries. |
Retry Timeout Period | Amount of time to wait for a response to a DNS query. |
Name Servers | Configured name servers. |
DNS Client Source Interface | Shows the configured source interface (source IP address) used for a DNS client. The IP address of the selected interface is used as source IP for all communications with the server. |
The following example shows CLI display output for the command.
(Extreme 220) # show hosts
Host name......................... Device
Default domain.................... gm.com
Default domain list............... yahoo.com, Stanford.edu, rediff.com
Domain Name lookup................ Enabled
Number of retries................. 5
Retry timeout period.............. 1500
Name servers (Preference order)... 176.16.1.18 176.16.1.19
DNS Client Source Interface....... (not configured)
Configured host name-to-address mapping:
Host Addresses
------------------------------ ------------------------------
accounting.gm.com 176.16.8.8
Host Total Elapsed Type Addresses
--------------- -------- ------ -------- --------------
www.stanford.edu 72 3 IP 171.64.14.203