ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Quality of Service Commands > Class of Service Commands > random-detect queue-parms > no random-detect queue-parms

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no random-detect queue-parms

Use this command to set the WRED configuration back to the default.

Format	no random-detect queue-parms queue-id-1 [queue-id-2 … queue-id-n]
Modes	Global Config Interface Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback