ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Switching Commands > Port-Channel/LAG (802.3ad) Commands > port lacpmode enable all > no port lacpmode enable all

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no port lacpmode enable all

This command disables Link Aggregation Control Protocol (LACP) on all ports.

Format	no port lacpmode enable all
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback