This command displays global ISDP settings.
Format | show isdp |
Mode | Privileged EXEC |
Timer | The frequency with which this device sends ISDP packets. This value is given in seconds. |
Hold Time | The length of time the receiving device should save information sent by this device. This value is given in seconds. |
Version 2 Advertisements | The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted. |
Neighbors table time since last change | The amount of time that has passed since the ISPD neighbor table changed. |
Device ID | The Device ID advertised by this device. The format of this Device ID is characterized by the value of the Device ID Format object. |
Device ID Format Capability | The Device ID format capability of the device.
|
Device ID Format | The Device ID format of the device.
|
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show isdp
Timer.......................................... 30
Hold Time...................................... 180
Version 2 Advertisements....................... Enabled
Neighbors table time since last change......... 0 days 00:00:00
Device ID...................................... 1114728
Device ID format capability.................... Serial Number, Host Name
Device ID format............................... Serial Number