mtu

Use this command to set the Maximum Transmission Unit (MTU) size, in bytes, for frames that ingress or egress the interface. You can use the mtu command to configure jumbo frame support for physical and port-channel LAG (Link Aggregation Group) interfaces. For the standard 200 Series implementation, the MTU size is an integer between 1500 and 9198 for both tagged packets and untagged packets.

Note

Note

To receive and process packets, the Ethernet MTU must include any extra bytes that layer-2 headers might require. To configure the IP MTU size, which is the maximum size of the IP packet (IP Header + IP payload), see ip mtu.
Default 1500 (untagged)
Format mtu 1500-9198
Mode Interface Config