This command sets the order of authentication methods used on a port. The available authentication methods are Dot1x, MAB, and captive portal. Ordering sets the order of methods that the switch attempts when trying to authenticate a new device connected to a port. If one method is unsuccessful or timed out, the next method is attempted.
Each method can only be entered once. Ordering is only possible between 802.1x and MAB.
Note
Captive portal is not supported in this version of the product.Format | authentication order {dot1x [mab [captive-portal] | captive-portal] | mab [dot1x [captive-portal]| captive-portal] | captive-portal} |
Mode | Interface Config |