Use this command to display the DHCP (Dynamic Host Configuration Protocol) Snooping binding entries. To restrict the output, use the following options:
Format | show ip dhcp snooping binding [{static/dynamic}] [interface unit/slot/port] [vlan id] |
Mode |
|
MAC Address | Displays the MAC address for the binding that was added. The MAC address is the key to the binding database. |
IP Address | Displays the valid IP address for the binding rule. |
VLAN | The VLAN for the binding rule. |
Interface | The interface to add a binding into the DHCP snooping interface. |
Type | Binding type; statically configured from the CLI or dynamically learned. |
Lease (sec) | The remaining lease time for the entry. |
The following example shows CLI display output for the command.
(Extreme 220) #show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address VLAN Interface Type Lease time (Secs)
------------------ ------------ ---- --------- ---- ------------------
00:02:B3:06:60:80 210.1.1.3 10 0/1 86400
00:0F:FE:00:13:04 210.1.1.4 10 0/1 86400