ExtremeSwitching 200 Series: Command Reference Guide Version 01 .02.04.0007 > Utility Commands > Serviceability Packet Tracing Commands > exception dump filepath > no exception dump filepath

Published February 2019prev | next

Print this page Print this page

Email this topic

Leave feedback Feedback

no exception dump filepath

Use this command to reset the exception dump filepath configuration to its factory default value.

Note

Note

This command is only available on selected Linux-based platforms.

Default	None
Format	exception dump filepath
Mode	Global Config

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback