Preface
Using the Command-Line Interface
Stacking Commands
Management Commands
Utility Commands
Switching Commands
Routing Commands
IPv6 Management Commands
Quality of Service Commands
Application Commands
200 Series Log Messages
- Core
- Utilities
- Management
- Switching
- QoS
- Routing/IPv6 Routing
- Stacking
- Technologies
- O/S Support

show ip dhcp conflict

This command displays address conflicts logged by the DHCP (Dynamic Host Configuration Protocol) server. If no IP address is specified, all the conflicting addresses are displayed.

Format	show ip dhcp conflict [ip-address]
Modes	Privileged EXEC User EXEC

Column

Meaning

IP address	The IP address of the host as recorded on the DHCP server.
Detection Method	The manner in which the IP address of the hosts were found on the DHCP server.
Detection time	The time when the conflict was found.

Published February 2019prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback